JTECH Medical COMMANDER ECHO - Console LED;LCD States; Instrument LED States

5
© 2017 JTECH Medical MN022_M
Console LED/LCD states
LCD Explanaon
Le Right
O O O O power state.
O O
On
The Console is on for navigang menus.
O
Rapidly blinking
RED
Baery is dead, and an aempt was made to turn the
console on.
O Solid RED
Baery voltage is crically low (Less than 20 minutes
remaining).
Solid GREEN O
The Console is plugged in and receiving power from an
external source. The current charging status is indicated on
the LCD screen.
Solid GREEN Solid GREEN
Logo
The Console is boong into Charging mode.
O Solid GREEN The Console is boong up.
O O The Console is shung down.
O
Blinking BLUE 1
me per second
On
The Console is in tesng mode and acvely communicang
with the instrument.
O
Blinking BLUE 1
me per second
Scanning
Console is aempng to scan for and register a new
instrument.
O O
Scanning
Channels
Console is scanning the RF channels and will automacally
set the best one.
Instrument LED States Explanaon
O O power state.
Solid GREEN Instrument is indicang that the baery has completed charging.
Blinking BLUE 1 me per second
The instrument is in tesng mode and acvely communicang with the
Console.
Solid BLUE blinking OFF 1 me
per second
Aempng to reestablish communicaon with the Console.
Blinking BLUE 10 mes per
second
The instrument is aempng to establish a communicaon link with the
Console.
Blinking RED 10 mes per second
The instrument has a low baery and is aempng to establish a
communicaon link with the Console.
Solid RED Baery is crically low (Less than 20 minutes remaining).
Blinking RED 5 mes per second Baery is dead. This happens on any aempt to turn the instrument on.
Blinking RED 1 me per second
The instrument has a low baery and acvely communicang with the
Console.
Solid RED blinking OFF 1 me per
second
The instrument has a low baery and is aempng to reestablish
communicaon with Console.
Solid Green, blinking BLUE 1 me
per second,
The instrument is plugged in, receiving power from an external source,
and the baery is acvely charging.
Solid Green, blinking BLUE 5
mes per second
The baery is overheated (thermal fault) warning.
Orange Unknown baery charging status.