JTECH Medical COMMANDER ECHO - Instrument Specific Settings

© 2017 JTECH Medical MN022_M
14
Instrument Specic Sengs
Inclinometer
Reps - Select from 1-8 repeons (Note: This instrument does not dierenate between sides).
Mode - Select either Stac, Dynamic, or Auto-Rep.
Info. - Displays instrument informaon (SN, REV, Baery, POS1-4)
Calibrate - Perform a full calibraon of the selected instrument.
Restore - This will restore the instrument’s calibraon to factory sengs.
Muscle Tester (MMT)
Reps - Select from 1-4 repeons, per side.
Threshold - Select a threshold at which the instrument will begin to record test data (1, 3, 5, 10, 20 lb).
Order - Select the order, in which the test will switch sides (LLRR, RRLL, LRLR, RLRL).
Info. - Displays instrument informaon (SN, REV, Baery, Zero CT, WT CT, Weight)
Calibrate - Perform a full calibraon of the selected instrument.
Restore - This will restore the instrument’s calibraon to factory sengs.
Grip
Reps - Select from 1-8 repeons, per side.
Threshold - Select a threshold at which the instrument will begin to record test data (3, 5, 10, 20 lb).
Time - Select a me, in seconds, for the test (1, 2, 3, 4, 5, or not med).
Order - Select the order, in which the test will switch sides (LLRR, RRLL, LRLR, RLRL).
Info. - Displays instrument informaon (SN, REV, Baery, Zero CT, WT CT, Weight)
Calibrate - Perform a full calibraon of the selected instrument.
Restore - This will restore the instrument’s calibraon to factory sengs.
Algometer
Reps - Select from 1-4 repeons, per side.
Threshold - Select a threshold at which the instrument will begin to record test data (0.2, 0.4, 1, 3 lb).
Time - Select a me, in seconds, for the test (1, 2, 3, 4, 5, 30, or not med).
Order - Select the order, in which the test will switch sides (LLRR, RRLL, LRLR, RLRL).
Info. - Displays instrument informaon (SN, REV, Baery, Zero CT, WT CT, Weight)
Calibrate - Perform a full calibraon of the selected instrument.
Restore - This will restore the instrument’s calibraon to factory sengs.
Goniometer
Reps - Select from 1-8 repeons (Note: This instrument does not dierenate between sides).
Info. - Displays instrument informaon (SN, REV, Baery, Zero CT, WT CT, Angle)
Calibrate - Perform a full calibraon of the selected instrument.
Restore - This will restore the instrument’s calibraon to factory sengs.