JTECH Medical COMMANDER ECHO - Wireless Grip (9 RF306)

© 2017 JTECH Medical MN022_M
26
Wireless Grip (9RF306)
Used to convey funconal abilies concerning grip strength.
1. Aach the posionable handle on the appropriate rung of the Grip
gauge by placing the Y-end on the chosen rung, then rotang the
C-end to the opposing rung and pushing the quick lock spring over
the rung, locking the handle in place.
2. Push the “On” buon to enable communicaon with the
Commander Echo Console.
For instrucons on operang the Commander Echo Console,
please refer to the Console Secon of the manual.
For instrucons on performing specic tests, please refer to the
oponal Mulmedia Help System CD.
For troubleshoong informaon, please see page 43
For technical specicaons, please see page 54
Rung Posions
1 2 34 5
Grip Cable (9AK103) – The Grip Cable is used for aaching
weights to the Grip.
Accessories
Wrist Lanyard (7AC006) – The Wrist Lanyard is used to
help prevent dropping devices when carrying, or when
performing some tests.