JTECH Medical COMMANDER ECHO - EMC Guidance

© 2017 JTECH Medical MN022_M
62
®
EMC Guidance
WARNING: Medical Electrical Equipment needs special precauons regarding EMC and needs to be
installed and put into service according to the EMC informaon provided in this manual. Carefully
read the informaon contained in this secon.
WARNING: The use of portable and mobile RF equipment can aect the normal operaon of
medical electrical equipment.
WARNING: Making any modicaons or using any accessories not specically approved by JTECH
Medical may reduce immunity to electromagnec interference or increase electromagnec
emissions.
Guidance and Manufacturer’s Declaraon - Electromagnec Emissions
The Commander Echo System is intended for use in the electromagnec environment specied
below. The customer or user of the Commander Echo System should assure that it is used in such
an environment.
Emissions test Compliance Electromagnec environment - guidance
RF emissions
CISPR 11
Group 2
The Commander Echo System must emit
electromagnec energy in order to perform its intended
funcon. Nearby electronic equipment may be aected.
RF emissions
CISPR 11
Class B
The Commander Echo System is suitable for use in all
establishments, including domesc establishments
and those directly connected to the public low-voltage
power supply network that supplies buildings used for
domesc purposes.
Harmonic emissions
IEC 61000-3-2
Class A and D
Voltage uctuaons/
icker emissions
IEC 61000-3-3
Complies
WARNING: The Commander Echo instruments and Console should not be used while stacked on, or
adjacent to, other electrical or medical electrical equipment. If stacked or adjacent use is necessary,
all electrical equipment should be observed to verify normal operaon.