JTECH Medical COMMANDER ECHO - Page 17

15
© 2017 JTECH Medical MN022_M
Instrument Specic Sengs (connued)
Pinch
Reps - Select from 1-4 repeons per side.
Threshold - Select a threshold at which the instrument will begin to record test data (0.4, 1, 3, 5 lb).
Time - Select a me, in seconds, for the test (1, 2, 3, 4, 5, or not med).
Order - Select the order, in which the test will switch sides (LLRR, RRLL, LRLR, RLRL).
Info. - Displays instrument informaon (SN, REV, Baery, Zero CT, WT CT, Weight)
Calibrate - Perform a full calibraon of the selected instrument.
Restore - This will restore the instrument’s calibraon to factory sengs.
Stac Force Gauge (SFG)
Reps - Select from 1-8 repeons (Note: This instrument does not dierenate between sides).
Threshold - Select a threshold at which the instrument will begin to record test data (5, 10, 20 lb).
Time - Select a me, in seconds, for the test (1, 2, 3, 4, 5, or not med).
Ready Time - Select a Ready Time, in seconds, which will run prior to the start of each repeon (0, 1, 2, 3s).
Info. - Displays instrument informaon (SN, REV, Baery, Zero CT, WT CT, Weight)
Calibrate - Perform a full calibraon of the selected instrument.
Restore - This will restore the instrument’s calibraon to factory sengs.