JUKI LK-1920 - HOW TO USE THE MEMORY SWITCH; Method of changing memory switch data

－
50
－
❹❷󱢶
❻ ❼
❽
8. HOW TO USE THE MEMORY SWITCH
1) Set the mode to input mode
Under the input mode where SET READY
LED
󱢶
goes out, change to the memory
switch data is enabled.
If the current mode is the sewing mode, press
READY key
❷
to change over the
mode to the input mode.
2) Call memory switch data edit screen
When MODE key
❹
is pressed, the
mode screen (operator level) is displayed.
On this screen, select the memory switch
data (level 1).
Press ITEM SELECT key
❻
to select
"01 Memory switch 1". When you press EDIT
key
❽
, the memory switch data screen
appears.
3) Select memory switch data to change
Press ITEM SELECT key
❻
and select
the data item which you desire to change.
8-1. Method of changing memory switch data
4) Change data
There are one data item to change the numerical value and the other data item to select the picto-
graph in the memory switch data.
No. such as is attached to the data item to change the numerical value. Set value can be
changed by increasing/decreasing the value with DATA CHANGE key
❼
.
No. such as is attached to the data item to select the pictograph. Pictograph can be select-
ed with DATA CHANGE key
❼
.
→
For the details of memory switch data, refer to
"8-2. List of the memory switch functions"p.51
.