－
57
－
(3) Connection of 2-step PK pedal
1) Loosen the four setscrews
❷
in the control
box to remove cover
❶
.
2) Remove the standard pedal cords from J18
and J26 connectors on the MAIN circuit
board.
3) Put the cord of PK 2-pedal unit in the elec-
trical box and connect it to 2-pedal unit cord
asm.. Then, connect it to J26 on the main
PCB.
2-step PK pedal : Part No M85905130AA
2-step pedal connecting cord asm. :
Part No. M90315800A0
❸
J26 White
❷
❶
J18 White
4) Loosen cable clip band
❸
. Bind and secure the foot pedal switch cable with the by clip band
❸
,
DANGER :
It is very important to carefully connect the cables to the correct connectors on the PWB. Wrong
connection poses a great risk.
To Next Page
Loading...
