– 51 –
Inputting the stitch length (normal feed) (
)
Editing the data on reverse feed stitching at the beginning of sewing
1) When
is pressed on the sew-
ing-start reverse feed stitching screen, the
"sewing-start reverse feed stitching data edit
screen" is displayed.
<Sewing-start reverse feed stitching data edit screen>
1) When
is pressed, the "Stitch length
(normal feed) input screen" is displayed.
2) When
is pressed, input of the stitch
length (normal feed) is enabled.
3) Enter the stitch length (normal feed) with nu-
meric keypad
. (-2.5 to 2.5)
* In the case
is selected, the stitch length
will be the one employed for normal feed
stitching section.
4) When
is pressed, the value you
have input is conrmed and the screen re-
turns to the "sewing-start reverse feed stitch-
ing data edit screen".
<Stitch length (normal feed) input screen>
To Next Page
Loading...
Need help?
General
