– 52 –
Inputting the stitch length (reverse feed) (
)
1) When
is pressed, the "Stitch length
(reverse feed) input screen" is displayed.
2) Enter the stitch length (reverse feed) with
numeric keypad
. (-2.5 to 2.5)
3) When
is pressed, the value you
have input is conrmed and the screen re-
turns to the "sewing-start reverse feed stitch-
ing data edit screen".
<Stitch length (reverse feed) input screen>
Inputting the sewing speed for the reverse feed stitching at the beginning of sewing (
)
1) When
is pressed, the "Sewing
speed for reverse feed stitching input screen"
is displayed.
2) Input a sewing speed with numeric keypad
.
(150 to 2000)
3) When
is pressed, the value you
have input is conrmed and the screen re-
turns to the "sewing-start reverse feed stitch-
ing data edit screen".
<Sewing speed for reverse feed stitching input screen>
Setting the needle thread tension function (
)
1) When
is pressed, the needle
thread tension function selection screen is
displayed.
2) Select the status (enable/disable) of the nee-
dle thread tension function with button
.
3) When
is pressed, the value you
have input is conrmed and the screen re-
turns to the "sewing-start reverse feed stitch-
ing data edit screen".
* In the case (enable) is selected in the
aforementioned item number 2, needle thread
tension edit button
is displayed on
the sewing-start reverse feed stitching data
edit screen.
<Needle thread tension function selection screen>
<Sewing-start reverse feed stitching data edit screen>
To Next Page
Loading...
