– 15 –
Press to display the pattern list screen.
1. Press switch to select the reverse stitching pattern, and the screen is automatically changed over to the
number of stitches reverse stitching setting screen to display the number of stitches which has already been set.
OFF ON OFF ON
Sewing
pattern
OFF OFF ON ON
(6) Explanation of operation panel IP-110
1) Reverse stitching pattern
No setting Reverse stitching Double reverse stitching
at the start of sewing at the start of sewing
2. When changing the number of stitches, change it with switched and for setting the number of stitches A
through D.
(The range of the number of stitches that can be changed : 0 to 99 stitches.)
3. Press switch to set the reverse stitching at the start of sewing.
4. Press switch to set the reverse stitching at the end of sewing.
No setting Reverse stitching Double reverse stitching
at the end of sewing at the end of sewing
To Next Page
Loading...
Need help?
General
