– 8 –
(4) Explanation of operation panel CP-170
1) Reverse stitching pattern
OFF ON OFF ON
OFF OFF ON ON
Sewing pattern
1. Press reverse stitching pattern switch to
specify the reverse stitching pattern.
2. The reverse stitching pattern is selected, and
the number of stitches and data on reverse
stitching which have already been specified are
shown on the panel.
3. If you want to change the number of stitches,
operate the " + " or " - " switch of switches for
setting the number of stitches A through D.
(The range of the number of stitches that can
be changed : 0 to 19 stitches)
4. Four different stitching patterns can be
performed by matching the ON and OFF settings
of automatic reverse stitching (for start) switch
and automatic reverse stitching (for end)
switch .
5. Furthermore, the double reverse stitching can
be selected by operating double reverse
stitching (for start) switch and double reverse
stitching (for end) switch .
To Next Page
Loading...
Need help?
General
