– 38 –
(3) Number of stitches to stop the sewing machine after
detection of material end setting (Function setting
No. 4)
Press / switch to advance to the function
setting No. 4.
It is possible to change the set value with switch
or switch .
Specified number of stitches : 0 to 19 stitches
(Caution) When the specified number of stitches is
insufficient, there is a case where the sew-
ing machine cannot stop within the speci-
fied number of stitches depending on the
speed of rotation of the sewing machine.
(4) One-shot automatic stitching setting function (Func-
tion setting No. 119)
Press / switch to advance to the function
setting No. 119.
It is possible to change the set value with switch
or switch .
0 : Pedal designated speed is prior.
1 : Automatic operation
(Caution) It is rendered effective when the material
end sensor function is set.
It is not possible to prohibit the one-shot
operation at the time of the overlapped
stitching operation.
Speed of rotation is the speed set at the
function setting No. 38.
When “1” is selected, the on-shot
automatic stitching display lights
up when the mode is returned to
the normal one.
(5) Thread trimming prohibition function setting (Func-
tion setting No. 9)
Thread trimming operation at normal stitching and
overlapped stitching can be prohibited by selecting
the thread trimming prohibition.
It is possible to change the set value with switch
or switch .
0 : Thread trimming is effective.
1 : Thread trimming is prohibited.
When “1” is selected, the thread
trimming prohibition display lights
up when the mode is returned to
the normal one.
To Next Page
Loading...
Need help?
General
