– 40 –
5) Confirmation of functional setup modification
When the change has been completed, press
/ switch or / switch to specify the
changed value.
(Caution)
1. When turning OFF the power before perform-
ing this work, the contents which have been
changed are not updated.
2. Press / switch , and screen display
will change to the contents of the setting No.
which is before by one.
3. Press / switch , and screen display
will change to the contents of next setting No.
After completing the operation, turn OFF the
power and turn ON the power again to return
to the normal operation.
After completing the operation, turn OFF the power and
turn ON the power again to return to the normal opera-
tion.
EXAMPLE) CHANGING THE FLICKER REDUCING
FUNCTION (SETTING No. 5)
Press / switch several times to adjust set No.
to “5”. Press switch three times to change the
set No. to “3” since the current set value is displayed on
LED . (standard “0”)
(Caution) Keep pressing switch or switch
, and the setting value can be changed
continuously.
4) Modification of functional setup
When you want to advance the setting No., press
/ switch to advance the setting No.
When you want to return the setting No., press
/ switch to return the setting No.
(Caution)When / switch ( / switch
) is held pressing, the setting No. will
return (will advance) continuously.
When the setting No. is advanced (re-
turned), the contents which are before by
one (after by one) will be determined.
So, be careful when changing the contents
( up/down switch is touched).
Specified No.
* Simultaneously press switch and switch , and the setting contents of set No. will return to
the initial value.
To Next Page
Loading...
Need help?
General
