JUKI SC-910N User Manual

– 30 –
No Item Description Setting range Indication of function setting Ref. page
117 Presser lifting
switch function
selection
When connecting knee switch, this function selects stop/use of
automatic presser lifting function by knee switch.
0 : Automatic presser lifting by knee switch is stopped
1 : Automatic presser lifting by knee switch is used.
* It is possible to set only when LH-4168 or LH-4188 is se-
lected for the machine head.
* When using this function, set the presser lifting switch one
stitch compensating function (No. 106) to “0” (function in-
valid).
0
/
1
1 1 7 0
118 Grease-up error
release
When grease-up error (E220 or E221) has occurred, the error is
released by setting the value to 1.
0 : Normal state
1 : Grease-up error is released when turning ON the power
next time.
(This function is also released after releasing grease-up
error.)
* When releasing grease-up error, be sure to execute grease-
up.
* It is possible to set only to the machine heads that require
grease-up (LH-4100 and some of LH-3500 series).
0
/
1
1 1 8 0
120 Main shaft
reference angle
compensation
Main shaft reference angle is compensated.
–35 to 35
1 2 0 – 2 1
39
121 Up position
starting angle
compensation
Angle to detect UP position starting is compensated.
–15 to 15
1 2 1 2
39
122 DOWN position
starting angle
compensation
Angle to detect DOWN position starting is compensated.
–15 to 15
1 2 2 0
39
*
Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the
time of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
If it is necessary to change the set value, please purchase the Engineer’s Manual and follow the instructions.
(Descriptions of setting in this list are the standard values at the time of delivery of DDL-9000A.)
However, contents of function setting are subject to change for improvement of function and performance without notice.
Items with mark are displayed when the machine heads of LH-4168, LH-4168D and LH-4188 are selected.

JUKI SC-910N Specifications

General

Brand	JUKI
Model	SC-910N
Category	Sewing Machine
Language	English