JUKI SC-910N User Manual

– 5 –
ENGLISH
1) Pa ss th e cor ds
1
o f the th read tr imm ing
solenoid, reverse-stitching solenoid, etc., and
the cords of the synchronizer
2
, safety switch
3
, machine head 4P connector
4
, motor signal
5
, motor output
6
through hole
A
in the table to
route them down under the machine table.
2) Loosen setscrew
8
in front cover
7
.
3) Pressing the side of front cover
7
in the direction
of the arrow, open the front cover toward you.
Note : Be sure to open / close the front cover
with your hands.
4) Connect 14P code
1
coming from the machine
head to connector
A
(CN46).
5) Connect 4P connector coming from the machine
head
4
to connector
B
(CN31). (It is not neces-
sary in case of DDL-9000A.)
6) Connect 4P connector
3
(safty switch connec-
tor) coming from the machine head to connector
C
(CN48).
7) Connect 7P connector
2
coming from the ma-
chine head to connector
D
(CN30).(It is not nec-
essary in case of DDL-9000A.)
8) Connect connector
5
coming from the machine
head (motor) to connector
E
(CN39).
9) When the optional AK138 device is attached,
connect 2P connector
9
coming from the AK de-
vice to connector
F
(CN40).
(Caution) 1. WhenusingtheAKdevice,setwhethertousetheAKdeviceafterconrminghowto
select the auto-lifter function. (Refter to “
#
-9. Setting of the auto lifter function” p. 41.)
2. Be sure to securely insert the respective connectors after checking the inserting di-
rections since all connectors have the inserting directions. (When using a type with
lock, insert the connectors until they go to the lock.) The sewing machine is not ac-
tuated unless the connectors are inserted properly. In addition, not only the problem
of error warning or the like occurs, but also the sewing machine and the control box
are damaged.
5
2
1
4
3
6
A
7
8
2
A
D
4
3
F
E
C
B
5
1
9

JUKI SC-910N Specifications

General

Brand	JUKI
Model	SC-910N
Category	Sewing Machine
Language	English