14
4 Functions and operation
-Frequency at the range start C235
-Frequency at the range end C236
-Start value for scaling SCL
-End value for scaling SCH
-Filter time DF
-Total resistance for resistance transmitter R FE
-Simulation of measurement output C001
The configuration level is exited (quit)
-after editing the last parameter,
-if no button has been pressed for at least 20 seconds,
-or by briefly pressing the button combination q + d.
The individual parameters can be altered, one after another. You
can step from one parameter to the next by pressing the q button.
To Next Page
Loading...
