0999.GB
B 6
3.5 EN Standards
Permanent sound level: 65 dB(A)
according to prEN 12053 as stipulated in ISO
4871.
A
The permanent sound level is an average value determined according to the stan-
dard’s guidelines and takes into consideration the sound level when driving, lifting
and in idle mode. The sound level is measured at the driver’s ear.
Electromagnetic compatibility (EC)
Observance of the following limit values accor-
ding to prEN 12895 "Floor Conveyors, Electro-
magnetic compatibility":
-Interference emission (EN 50081-1)
-Resistance to disturbance (EN 50 082-2)
-Electrostatic discharge (EN 61000-4-2)
A
Alterations of the electric or electronic components and their arrangement must only
by carried out with written approval of the manufacturer.
3.6 Operation conditions
Environmental temperature
Standard type during operation: +5°C to +40°C
A
If the floor conveyor is to be permanently used in an environment with 5°C or less, in
cold storage depots or in areas with extreme temperature or humidity changes, a spe-
cial equipment and approval is required.
0999.GB
B 6
3.5 EN Standards
Permanent sound level: 65 dB(A)
according to prEN 12053 as stipulated in ISO
4871.
A
The permanent sound level is an average value determined according to the stan-
dard’s guidelines and takes into consideration the sound level when driving, lifting
and in idle mode. The sound level is measured at the driver’s ear.
Electromagnetic compatibility (EC)
Observance of the following limit values accor-
ding to prEN 12895 "Floor Conveyors, Electro-
magnetic compatibility":
-Interference emission (EN 50081-1)
-Resistance to disturbance (EN 50 082-2)
-Electrostatic discharge (EN 61000-4-2)
A
Alterations of the electric or electronic components and their arrangement must only
by carried out with written approval of the manufacturer.
3.6 Operation conditions
Environmental temperature
Standard type during operation: +5°C to +40°C
A
If the floor conveyor is to be permanently used in an environment with 5°C or less, in
cold storage depots or in areas with extreme temperature or humidity changes, a spe-
cial equipment and approval is required.