Current capacity plate
The capacity plate for stacking, transport and double-deck operations (28) specifies
the truck’s capacity Q (in kg) during stacking, transport and double-deck operations:
A= Stacking operations (storing and retrieving loads):
During high-level lift (mast lift) observe the capacity depending on the lift
height, see page 37.
B= Transport operations:
Max. capacity when transporting loads horizontally 2000 kg with the support
arms raised and without high-level lift (mast lift).
C= Double-decker operations:
Max. capacity for high-level lifting (mast lift) is ZZZ kg.
Max. capacity for concurrent high-level lifting (mast lift) and low-level lifting
(support arm lift) is 2000 kg.
Z
During stacking operations with the low-level lift (support arm lift) raised, loads can
be stored and retrieved up to a lift height of 1800 mm. For lift heights above
1800 mm the low-level lift (support arm lift) must be lowered.
Z
Do not transport loads when they are raised (>500 mm).
Z
The maximum lift height for double-deck operations is 1800 mm.
42
04.19 en-GB
To Next Page
Loading...
Need help?
General
