To Next Page
G
Gina PowellNov 16, 2025
What to do if my Jungheinrich EKS 310 truck does not start?
- CCarl BensonNov 16, 2025
If your Jungheinrich forklift doesn't start, there are several potential causes: * The battery might not be connected, so check the battery plug and connect it if needed. * Safety gates might be open, so ensure they are closed. * The EMERGENCY DISCONNECT switch may be pressed, so unlatch it. * The keyswitch might be in the “0” position, so set it to “I.” * The battery charge could be too low, so check the charge and charge if necessary. * The foot switch may not be pressed, so press it. * A fuse might be blown, so check the fuses. * The travel cutout might be activated, so press the travel cutout bypass switch (charge battery). * The travel cutout might be activated via the aisle end safety device, so switch off the automatic traction controller and re-align the truck wi...
General
