Juniper E Series User Manual

Module Functionality ! 117
Chapter 12
Module Specifications
This chapter provides information about line modules, SRP modules, and I/O
modules available for E-series routers. All line modules, with the exception of the
IPSec Service and Tunnel Service module, combine with I/O modules to provide
particular capabilities and connections.
Module Functionality
See Table 20 for module details such as assembly name, capabilities, module and
I/O module label, and software release compatibility.
The table lists the first software release that each module and its corresponding I/O
modules support. If a module has been deprecated, the final software release that
supports the module is listed; otherwise, N/A is displayed. Because of modifications
and updates, some versions of modules support only later software releases than
those indicated in the table.
NOTE: In this chapter, the term module assembly is used to describe the
combination of a line module and an I/O module.
Topic Page
Module Functionality 117
Module Specifications 125
I/O Module Specifications 128
Table 20: Module functionality
Release Information
Module
Assembly Name
Description Capability
Line Module
Label
I/O Module
Label
First
Supported
a
Final
Supported
CE1
CE1 Channelized E1 E1
HDLC framing
CE1 CE1
FULL
I/O
1.1.0 N/A

Juniper E Series Specifications

General

Brand	Juniper
Model	E Series
Category	Network Router
Language	English