Juniper E Series

Before You Begin ! 21
Chapter 2
Unpacking and Inspecting E-series
Routers
This chapter reviews shipping contents and unpacking procedures for E-series
routers.
Before You Begin
Before you begin unpacking the router, be sure you have the following tools:
! A No. 2 Phillips screwdriver
! A utility knife
! A mechanical lift, or at least two people to assist in lifting
Unpacking ERX-14xx Models
ERX-14xx models come boxed, bolted, and strapped to a skid. For your
convenience, Juniper Networks recommends that you unpack the E-series router in
the location where you want to install it.
Topic Page
Before You Begin 21
Unpacking ERX-14xx Models 21
Unpacking ERX-7xx Models and ERX-310 Routers 22
Inspecting E-series Router Components and Accessories 23
If You Detect or Suspect Damage 23
Contacting Juniper Networks 23
The Next Step 23
WARNING: Three people are required to install the E-series router in a rack: two to
lift the system into position and one to screw it to the rack.