Juniper E Series User Manual

E-series Hardware Guide
140 ! I/O Module Specifications
OC12
STM4
APS
LONG
HAUL
ASIC ERX-7xx models
ERX-14xx models
ERX-310 router
SRP-5G+
SRP-10G
SRP-40G
SRP-40G+
SRP-SE10G
1 active
1 redundant
SC full duplex
! Tx power:
! min: –5.0 dBm
! max: 0 dBm
! Center wavelength: 1310 nm
! Rx input power:
! min: –34 dBm
! max: –7 dBm
! Rated for 40 km (24.8 miles)
of 9-micron core cable
OC48/STM16
OC48
FRAME
APS
ASIC ERX-1440 router SRP-40G+ 1 LC full duplex
! Tx power:
! min: –5.0 dBm
! max: 0 dBm
! Center wavelength: 1310 nm
! Rx input power:
! min: –18 dBm
! max: –0 dBm
! Rated for 15 km (9.3 miles) of
9-micron core cable
SM
No I/O
module
N/A ERX-7xx models
ERX-14xx models
ERX-310 router
SRP-5G+
SRP-10G
SRP-40G
SRP-40G+
SRP-SE10G
N/A N/A N/A
SRPs
SRP-5G
SRP I/O
N/A ERX-705 router SRP-5G 7 Terminal
blocks
BNC
Wire wrap
posts
RJ-45
RS-232 (DB-9)
See Chapter 6, Cabling E-series
Routers.
SRP-5G+
SRP I/O
N/A ERX-705 router SRP-5G+ 7 Terminal
blocks
BNC
Wire wrap
posts
RJ-45
RS-232 (DB-9)
See Chapter 6, Cabling E-series
Routers.
Table 22: I/O module specifications (continued)
I/O Module
Label
a
Type
Model
Compatibility
SRP Module
Compatibility No. of Ports
Connector
Type Cabling Specifications

Juniper E Series Specifications

General

Brand	Juniper
Model	E Series
Category	Network Router
Language	English