Juniper EX4100 User Manual

Table 21: AC Power Cord Specicaons (Connued)
Country or Region Electrical Specicaons Plug Standards Juniper Model Number
Switzerland 250 VAC, 10 A, 50 Hz SEV 6534-2 Type 12G CBL-EX-PWR-C13-SZ
United Kingdom 250 VAC, 10 A, 50 Hz BS 1363/A Type BS89/13 CBL-EX-PWR-C13-UK
NOTE: For North America, use AC power cords with specicaons 125 VAC, 13 A, 60 Hz for
EX4100-24T and EX4100-48T; use AC power cords with specicaons 125 VAC, 15 A, 60 Hz
for EX4100-24P, EX4100-48P and EX4100-F-48P.
Figure 57 on page 77 illustrates the plug on the power cord for some of the countries or regions listed
in Table 21 on page 76.
Figure 57: AC Plug Types
CAUTION: Do not use the AC power cord with any other product other than EX4100
and EX4100-F.
CAUTION: Power cords must not block access to switch components.
77

Juniper EX4100 Specifications

General

Model	EX4100
Category	Switch
Layer	Layer 2/3
Power Consumption	Varies by model and configuration
PoE	Optional
Management	Web UI, CLI, SNMP
Operating Temperature	0°C to 45°C
Input Voltage	100-240V AC
Storage Temperature	-40°C to 70°C
Humidity	5% to 90% non-condensing
DC Power Input	-48V DC
JUNOS OS	Yes
Security Features	ACLs
Layer 2 Features	VLAN, RSTP, MSTP, LACP
Layer 3 Features	Static routing, OSPF
QoS	8 queues per port