EasyManuals Logo

Juniper EX4200 Series User Manual

Juniper EX4200 Series
280 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #126 background imageLoading...
Page #126 background image
NOTE: The DC power supply in EX3200 and EX4200 switches does not support Power
over Ethernet (PoE);you can use either an external power injectoror an ACpower supply
to supply power to PoE devices that you connect to the switch.
NOTE: For DC power supplies, we recommend that you provide at least 7.5 A @ 48 VDC
and use a facilitycircuitbreaker rated for10 A minimum. Doing so enablesyou to operate
the switch in any configuration without upgrading the power infrastructure, and allows
the switch to function at full capacity using multiple power supplies.
Related Topics AC Power Cord Specifications for EX3200 and EX4200 Switches on page 102
Power Supply in EX3200 and EX4200 Switches on page 27
General Safety Guidelines and Warnings for EX Series Switches on page 207
General Electrical Safety Guidelines and Warnings for EX Series Switches on page 235
AC Power Cord Specifications for EX3200 and EX4200 Switches
Detachable AC power cords are supplied with the switch. The coupler is type C13 as
described by International Electrotechnical Commission (IEC) standard 60320. The plug
at the male end of the power cord fits into the power source outlet that is standard for
your geographical location.
CAUTION: The AC power cord for the switches is intended for use with that switch only
and not for any other use.
NOTE: In North America, AC power cords must not exceed 4.5 meters (approximately
14.75 feet) in length, to comply with National Electrical Code (NEC) Sections 400-8
(NFPA 75, 5-2.2) and 210-52 and Canadian Electrical Code (CEC) Section 4-010(3).
The cords supplied with the switch are in compliance.
Table 32 on page 102 lists AC power cord specifications provided for each country or
region.
Table 32: AC Power Cord Specifications
Plug StandardsElectrical SpecificationsCountry/Region
AS/NZ 3112250 VAC, 10 A, 50 HzAustralia
GB2099 and GB1002250 VAC, 10 A, 50 HzChina
CEE (7) VII250 VAC, 10 A, 50 HzEurope (except Italy, Switzerland, and
United Kingdom)
Copyright © 2010, Juniper Networks, Inc.102
Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper EX4200 Series and is the answer not in the manual?

Juniper EX4200 Series Specifications

General IconGeneral
Switching Capacity128 Gbps
Ports24 or 48 10/100/1000BASE-T ports
Virtual ChassisUp to 10 switches
Layer 3 RoutingYes
Maximum VLANs4096
DRAM1 GB
Flash Memory1 GB
Humidity5% to 90% non-condensing
Power SupplyAC or DC options
MAC Address Table Size32, 000 entries
Operating Temperature0°C to 45°C
Layer 2 FeaturesVLAN, STP, RSTP, MSTP, LACP
ManagementCLI, Web UI, SNMP
Storage Temperature-40°C to 70°C
Input VoltageAC: 100-240V; DC: -48V

Related product manuals