Juniper EX4200 Series User Manual

CHAPTER 21
Compliance Information
•
Agency Approvals for EX Series Switches on page 251
•
Compliance Statements for EMC Requirements for EX Series Switches on page 252
•
Compliance Statements for Acoustic Noise for EX Series Switches on page 254
•
Declaration of Conformity for EX3200 and EX4200 Switches on page 255
Agency Approvals for EX Series Switches
EX Series switches comply with the following standards:
•
Safety
•
CAN/CSA-22.2 No. 60950–1–03/UL 60950–1. Safety of Information Technology
Equipment
•
EN 60950–1:2001. Safety of Information Technology Equipment
•
EN 60825–1 Safety of Laser Products – Part 1: Equipment Classification,
Requirements and User's Guide
•
EMC
•
FCC 47CFR Part 15 Class A (USA)
•
EN 55022 Class A Emissions (Europe)
•
ICES-003 Class A
•
VCCI Class A (Japan)
•
AS/NZS CISPR 22 Class A (Australia/New Zealand)
•
CISPR 22 Class A
•
EN 55024
•
EN 300386
•
EN 61000-3-2 Power Line Harmonics
•
EN 61000-3-3 Voltage Fluctuations and Flicker
251Copyright © 2010, Juniper Networks, Inc.

Juniper EX4200 Series Specifications

General

Switching Capacity	128 Gbps
Ports	24 or 48 10/100/1000BASE-T ports
Virtual Chassis	Up to 10 switches
Layer 3 Routing	Yes
Maximum VLANs	4096
DRAM	1 GB
Flash Memory	1 GB
Humidity	5% to 90% non-condensing
Power Supply	AC or DC options
MAC Address Table Size	32, 000 entries
Operating Temperature	0°C to 45°C
Layer 2 Features	VLAN, STP, RSTP, MSTP, LACP
Management	CLI, Web UI, SNMP
Storage Temperature	-40°C to 70°C
Input Voltage	AC: 100-240V; DC: -48V