Juniper EX4200 Series User Manual

Table 32: AC Power Cord Specifications (continued)
Plug StandardsElectrical SpecificationsCountry/Region
CEI 23-16250 VAC, 10 A, 50 HzItaly
JIS C8303125 VAC, 12 A, 50 Hz or 60 HzJapan
NEMA 5-15125 VAC, 13 A, 60 HzNorth America
SEV 1011 SEV 6534/2250 VAC, 10 A, 50 HzSwitzerland
BS 1363/A250 VAC, 10 A, 50 HzUnited Kingdom
Figure 30 on page 103 illustrates the plug on the power cord for each country or region
listed in Table 32 on page 102.
Figure 30: AC Plug Types
Related Topics • Power Supply in EX3200 and EX4200 Switches on page 27
• General Safety Guidelines and Warnings for EX Series Switches on page 207
• General Electrical Safety Guidelines and Warnings for EX Series Switches on page 235
• Prevention of Electrostatic Discharge Damage on EX Series Switches on page 236
103Copyright © 2010, Juniper Networks, Inc.
Chapter 7: Planning Power Requirements

Juniper EX4200 Series Specifications

General

Switching Capacity	128 Gbps
Ports	24 or 48 10/100/1000BASE-T ports
Virtual Chassis	Up to 10 switches
Layer 3 Routing	Yes
Maximum VLANs	4096
DRAM	1 GB
Flash Memory	1 GB
Humidity	5% to 90% non-condensing
Power Supply	AC or DC options
MAC Address Table Size	32, 000 entries
Operating Temperature	0°C to 45°C
Layer 2 Features	VLAN, STP, RSTP, MSTP, LACP
Management	CLI, Web UI, SNMP
Storage Temperature	-40°C to 70°C
Input Voltage	AC: 100-240V; DC: -48V