Juniper EX4200 Series

Table 22: SFP+ Direct Attach Cable Specifications (continued)
SpecificationModel
10 Gbps full-duplex serial transmissionRateEX-SFP-10GE-DAC-5m
SFP+ passive Twinax cable assemblyConnector type
3.3 VSupply voltage
0.57 WPower consumption (per end)
-40
°
C to 85
°
CStorage temperature
TwinaxCable type
24 AWGWire AWG
2 in.Minimum cable bend radius
100 ohmsCable characteristic impedance
2% maximumCrosstalk between pairs
1.31 nsec/ftTime delay
5 m (16.4 ft)Length
10 Gbps full-duplex serial transmissionRateEX-SFP-10GE-DAC-7m
SFP+ passive Twinax cable assemblyConnector type
3.3 VSupply voltage
0.57 WPower consumption (per end)
-40
°
C to 85
°
CStorage temperature
TwinaxCable type
24 AWGWire AWG
2 in.Minimum cable bend radius
100 ohmsCable characteristic impedance
2% maximumCrosstalk between pairs
1.31 nsec/ftTime delay
7 m (23 ft)Length
Copyright © 2010, Juniper Networks, Inc.72
Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches