Juniper EX4500 Series

unit 0 {
family ethernet-switching;
}
}
xe-0/2/0 {
unit 0 {
family ethernet-switching;
}
}
xe-0/2/1 {
unit 0 {
family ethernet-switching;
}
}
xe-0/2/2 {
unit 0 {
family ethernet-switching;
}
}
xe-0/2/3 {
unit 0 {
family ethernet-switching;
}
}
}
protocols {
igmp-snooping {
vlan all;
}
rstp;
lldp {
interface all;
}
lldp-med {
interface all;
}
}
ethernet-switching-options {
storm-control {
interface all;
}
}
Related Topics ■ Reverting to the Default Factory Configuration for the EX Series Switch
■ Connecting and Configuring an EX Series Switch (CLI Procedure) on page 107
■ Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 109
■ Understanding Configuration Files for EX Series Switches
■ EX Series Switches Interfaces Overview
106 ■ EX4500 Default Configuration
Complete Hardware Guide for EX4500 Ethernet Switches