Juniper SRX110 Hardware Guide

Table 4: SRX110 Services Gateway Hardware Features
DescriptionFeature
1 GBDDR Memory
60 W (12 VDC and 5 A)Power supply adapter
100 to 240 VACAC input voltage
50 to 60 HzAC input line frequency
1.5 A maximumAC adapter current rating
8Fast Ethernet ports
1Console port
1USB port
1 GBCompactFlash card
Status, Alarm, Power, and 3G
•
For SRX110H-VA—VDSL/ADSL-POTS (TX/RX
and SYNC)
•
For SRX110H-VB—VDSL/ADSL-ISDN (TX/RX
and SYNC)
LEDs
13G-WAN USB port (rear side)
NOTE: If there is any problem with the CompactFlash card, you must return
the services gateway for repair or replacement. For this, you need to contact
Juniper Networks Technical Assistance Center (JTAC).
For more details on Junos OS features and licenses for the SRX110 Services Gateway,
see the following guides:
•
Initial Configuration for Security Devices
•
Monitoring and Troubleshooting for Security Devices
Related
Documentation
• SRX110 Services Gateway Description on page 3
• SRX110 Services Gateway Specifications on page 7
5Copyright © 2013, Juniper Networks, Inc.
Chapter 1: Introduction to the SRX110 Services Gateway

Juniper SRX110 Specifications

General

Memory	1 GB
Flash	1 GB
Operating Temperature	32°F to 104°F (0°C to 40°C)
Interfaces	8 x 10/100/1000 Ethernet
Power Supply	AC 100-240V, 50-60 Hz
Humidity	10% to 90% non-condensing