Juniper SRX110 Hardware Guide

PART 3
Setting Up the SRX110 Services Gateway
•
Preparing the Site for the SRX110 Services Gateway Installation on page 37
•
Installation Overview for the SRX110 Services Gateway on page 45
•
Required Tools and Parts for Installing and Maintaining the SRX110 Services
Gateway on page 47
•
Unpacking the SRX110 Services Gateway on page 49
•
Preparing the SRX110 Services Gateway for Installation on page 53
•
Installing the SRX110 Services Gateway on page 57
•
Connecting, Grounding, and Powering On the SRX110 Services Gateway on page 67
•
SRX110 Services Gateway Autoinstallation on page 73
•
Connecting the SRX110 Services Gateway to Management Devices on page 75
•
Performing Initial Software Configuration on the SRX110 Services Gateway on page 83
35Copyright © 2013, Juniper Networks, Inc.

Juniper SRX110 Specifications

General

Memory	1 GB
Flash	1 GB
Operating Temperature	32°F to 104°F (0°C to 40°C)
Interfaces	8 x 10/100/1000 Ethernet
Power Supply	AC 100-240V, 50-60 Hz
Humidity	10% to 90% non-condensing