CHAPTER 12
SRX110 Services Gateway Autoinstallation
This chapter includes the following topic:
•
SRX110 Services Gateway Autoinstallation Overview on page 73
SRX110 Services Gateway Autoinstallation Overview
The autoinstallation process begins any time a services gateway is powered on and
cannot locate a valid configuration file in the internal flash memory device. Typically, a
configuration file is unavailable when a services gateway is powered on for the first time
or if the configuration file is deleted from the internal flash memory device.
The autoinstallation feature enables you to deploy multiple services gateways from a
central location in the network.
If you are setting up many devices, autoinstallation can help automate the configuration
process by loading configuration files onto new or existing devices automatically over
the network. You can use either the J-Web configuration editor or the command-line
interface (CLI) configuration editor to configure a device for autoinstallation.
For the autoinstallation process to work, you must store one or more host-specific or
default configuration files on a configuration server in the network and have a service
available—typically Dynamic Host Configuration Protocol (DHCP)—to assign an IP address
to the services gateway.
Autoinstallation occurs automatically when you connect an Ethernet port on a new
services gateway to the network and power on the device. To simplify the process, you
can explicitly enable autoinstallation on a device and specify a configuration server, an
autoinstallation interface, and a protocol for IP address acquisition.
For more information about configuring autoinstallation, see the following topics:
•
Initial Configuration for Security Devices
•
Monitoring and Troubleshooting for Security Devices
Related
Documentation
• Connecting the SRX110 Services Gateway to the Power Supply on page 67
• Grounding the SRX110 Services Gateway on page 69
• Powering On the SRX110 Services Gateway on page 71
73Copyright © 2013, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
