Juniper SRX110

CHAPTER 10
Installing the SRX110 Services Gateway
This chapter includes the following topics:
•
SRX110 Services Gateway Safety Requirements, Warnings, and Guidelines on page 57
•
Installing the SRX110 Services Gateway on page 57
SRX110 Services Gateway Safety Requirements, Warnings, and Guidelines
To avoid harm to yourself or the device as you install and maintain it, follow the guidelines
for working with and near electrical equipment, as well as the safety procedures for
working with devices. For a discussion of how to make the installation site a safe
environment and a list of safety warnings, see “SRX110 Services Gateway Definition of
Safety Warning Levels” on page 107.
NOTE: Providing an exhaustive set of guidelines for working with electrical
equipment is beyond the scope of this guide.
Related
Documentation
General Site Guidelines for Installing the SRX110 Services Gateway on page 40•
• Required Tools and Parts for Installing and Maintaining the SRX110 Services Gateway
on page 47
• Preparing the SRX110 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation on page 53
Installing the SRX110 Services Gateway
This topic includes the following sections:
•
Adjusting the Power Supply Adapter Tray for the SRX110 Services Gateway for
Rack-Mount Installation on page 58
•
Installing the SRX110 Services Gateway in a Rack on page 58
•
Installing the SRX110 Services Gateway on a Desk on page 62
•
Installing the SRX110 Services Gateway on a Wall on page 63
57Copyright © 2013, Juniper Networks, Inc.