Juniper SRX110 Hardware Guide

set interface pt-1/0/0 unit 0 family inet address interface address/destination prefix
•
Add or select a security zone; for example, Zone1:
set security zones security-zone trust interfaces pt-1/0/0.0 host-inbound-traffic
system-services all
•
Add or select security zones for host inbound traffic option protocols:
set security zones security-zone trust interfaces pt-1/0/0.0 host-inbound-traffic protocols
all
•
Set security policies:
set security policies default-policy permit-all
For more details, see the Junos OS Interfaces Configuration Guide for Security Devices.
Related
Documentation
• SRX110 Services Gateway Integrated VDSL2 Interface Overview on page 29
• SRX110 Services Gateway Integrated VDSL2 Interface Key Features on page 30
• SRX110 Services Gateway Integrated VDSL2 Interface LEDs on page 31
33Copyright © 2013, Juniper Networks, Inc.
Chapter 4: SRX110 Services Gateway Integrated VDSL2 Interface

Juniper SRX110 Specifications

General

Memory	1 GB
Flash	1 GB
Operating Temperature	32°F to 104°F (0°C to 40°C)
Interfaces	8 x 10/100/1000 Ethernet
Power Supply	AC 100-240V, 50-60 Hz
Humidity	10% to 90% non-condensing