Table 35: SRX110 Services Gateway Preinstallation Checklist for
Wall-Mount Installation (continued)
Additional InformationTask
Verify that you have the following parts available in
your wall-mounting kit to mount the SRX110 Services
Gateway on a wall:
•
Wall-mounting brackets
•
Screws
NOTE: The wall-mounting kit is not shipped with the device and must be
ordered separately.
Related
Documentation
• Site Preparation Checklist for the SRX110 Services Gateway on page 35
• Unpacking the SRX110 Services Gateway on page 81
• Clearance Requirements for Airflow and Hardware Maintenance of the SRX110 Services
Gateway on page 40
• Preparing the SRX110 Services Gateway for Rack-Mount Installation on page 85
• Preparing the SRX110 Services Gateway for Desk-Mount Installation on page 86
Copyright © 2012, Juniper Networks, Inc.88
SRX110 Services Gateway Hardware
To Next Page
Loading...
