Juniper SRX110 User Manual

Figure 21: SRX110 Services Gateway Wall Installation — Attaching the
Mounting Brackets
g033616
Related
Documentation
General Site Guidelines for Installing the SRX110 Services Gateway on page 38•
• Required Tools and Parts for Installing and Maintaining the SRX110 Services Gateway
on page 78
• Preparing the SRX110 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation
• Adjusting the Power Supply Adapter Tray for the SRX110 Services Gateway for
Rack-Mount Installation on page 92
• Installing the SRX110 Services Gateway in a Rack on page 89
• Installing the SRX110 Services Gateway on a Desk on page 93
Installing a 3G USB Modem in the SRX110 Services Gateway USB Port
This topic includes the following sections:
•
Connecting the 3G USB Modem on the USB Modem Extension Cable-Mount on page 98
•
Installing a 3G USB Modem on the Rear Side of the SRX110 Services Gateway on page 99
97Copyright © 2012, Juniper Networks, Inc.
Chapter 13: Installing the Services Gateway

Juniper SRX110 Specifications

General

Memory	1 GB
Flash	1 GB
Operating Temperature	32°F to 104°F (0°C to 40°C)
Interfaces	8 x 10/100/1000 Ethernet
Power Supply	AC 100-240V, 50-60 Hz
Humidity	10% to 90% non-condensing