Juniper SRX110 User Manual

• SRX110 Services Gateway Specifications on page 7
SRX110 Services Gateway Power Supply
The power supply for the SRX110 Services Gateway is external. You must use the power
supply adapter provided by Juniper Networks to provide power to the services gateway.
Figure 8 on page 17 shows the label for the 12 V power supply.
Figure 8: SRX110 Services Gateway — 12 V Power Supply
g033607
Related
Documentation
• SRX110 Services Gateway Specifications on page 7
• SRX110 Services Gateway Front Panel and Back Panel Views with 3G and Integrated
VDSL2 on page 9
• Monitoring the SRX110 Services Gateway Power System on page 144
• Powering On the SRX110 Services Gateway on page 105
• Powering Off the SRX110 Services Gateway on page 105
17Copyright © 2012, Juniper Networks, Inc.
Chapter 2: Hardware Components and Specifications

Juniper SRX110 Specifications

General

Memory	1 GB
Flash	1 GB
Operating Temperature	32°F to 104°F (0°C to 40°C)
Interfaces	8 x 10/100/1000 Ethernet
Power Supply	AC 100-240V, 50-60 Hz
Humidity	10% to 90% non-condensing