Juniper SRX110 User Manual

CHAPTER 6
Preparing the Site for Installation
•
Site Preparation Checklist for the SRX110 Services Gateway on page 35
•
General Site Guidelines for Installing the SRX110 Services Gateway on page 38
•
SRX110 Services Gateway Cabinet Requirements on page 38
•
SRX110 Services Gateway Rack Requirements on page 39
•
Clearance Requirements for Airflow and Hardware Maintenance of the SRX110 Services
Gateway on page 40
•
SRX110 Services Gateway Electrical and Power Requirements on page 41
Site Preparation Checklist for the SRX110 Services Gateway
The checklist in Table 17 on page 35 summarizes the tasks you need to perform when
preparing a site for installing the services gateway.
Table 17: Site Preparation Checklist for Services Gateway Installation
NotesDatePerformed By
Additional
InformationItem or Task
Environment
“SRX110
Services
Gateway
Specifications”
on page 7
Verify that the
environmental factors
such as temperature
and humidity do not
exceed device
tolerances.
Power
35Copyright © 2012, Juniper Networks, Inc.

Juniper SRX110 Specifications

General

Memory	1 GB
Flash	1 GB
Operating Temperature	32°F to 104°F (0°C to 40°C)
Interfaces	8 x 10/100/1000 Ethernet
Power Supply	AC 100-240V, 50-60 Hz
Humidity	10% to 90% non-condensing