Juniper SRX110 User Manual

You can use other wizards to configure basic firewall policies, VPN settings, and NAT
rules. Choose Configure > Wizards to use the available wizards. Use the J-Web interface
or the CLI for more extensive configuration.
NOTE: SRX110B-VA and SRX110B-VB do not support security features such
as unified threat management and intrusion detection and prevention.
For more instructions on managing users and operations, monitoring network performance,
upgrading software, and diagnosing common problems on an SRX110 Series Services
Gateway, see the following guides:
•
Junos OS Initial Configuration Guide for Security Devices
•
Junos OS Monitoring and Troubleshooting Guide for Security Devices
Related
Documentation
• Performing Initial Software Configuration on the SRX110 Services Gateway Using the
CLI on page 123
• SRX110 Services Gateway Software Configuration Overview on page 121
• SRX110 Services Gateway Secure Web Access Overview on page 131
Copyright © 2012, Juniper Networks, Inc.130
SRX110 Services Gateway Hardware

Juniper SRX110 Specifications

General

Memory	1 GB
Flash	1 GB
Operating Temperature	32°F to 104°F (0°C to 40°C)
Interfaces	8 x 10/100/1000 Ethernet
Power Supply	AC 100-240V, 50-60 Hz
Humidity	10% to 90% non-condensing