Juniper SRX110 - Page 47

set interface pt-1/0/0 unit 0 family inet address interface address/destination prefix
•
Add or select a security zone; for example, Zone1:
set security zones security-zone trust interfaces pt-1/0/0.0 host-inbound-traffic
system-services all
•
Add or select security zones for host inbound traffic option protocols:
set security zones security-zone trust interfaces pt-1/0/0.0 host-inbound-traffic protocols
all
•
Set security policies:
set security policies default-policy permit-all
For more details, see the Junos OS Interfaces Configuration Guide for Security Devices.
Related
Documentation
• SRX110 Services Gateway Integrated VDSL2 Interface Overview on page 25
• SRX110 Services Gateway Integrated VDSL2 Interface Key Features on page 26
• SRX110 Services Gateway Integrated VDSL2 Interface LEDs on page 27
29Copyright © 2012, Juniper Networks, Inc.
Chapter 4: SRX110 Services Gateway Integrated VDSL2 Interface