Juniper SRX345 Hardware Guide

Table 9: Site Preparation Checklist for SRX345 Services Gateway
Installation (continued)
NotesDatePerformed By
Additional
InformationItem or Task
“Connecting the
SRX345
Services
Gateway
Grounding
Cable” on
page 56
Locate sites for
connection of system
grounding.
“SRX345
Services
Gateway Power
Specifications
and
Requirements”
on page 34
Calculate the power
consumption and
requirements.
Rack Requirements
“SRX345
Services
Gateway
Rack-Mounting
Requirements
and Warnings”
on page 25
Verify that your rack
meets the minimum
requirements.
Rack Installation
“Preparing the
SRX345
Services
Gateway for
Rack-Mount
Installation” on
page 49
Plan the rack location,
including required space
clearances.
“Connecting the
SRX345
Services
Gateway to the
Building
Structure” on
page 49
Secure the rack to the
floor and building
structure.
Cabinet Requirements
21Copyright © 2017, Juniper Networks, Inc.
Chapter 6: Planning and Preparing the Site

Juniper SRX345 Specifications

General

USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	8
Flash memory	8000 MB
Internal memory	4000 MB
Certification	FCC A, RoHS 2
Rack capacity	1U
Heat dissipation	420 BTU/h
Power consumption (typical)	122 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Routing protocols	BGP, CLNS, MPLS, OSPF, RIP-1, RIP-2
Supported network protocols	IPv4, IPv6
Firewall security	Yes
Security algorithms	IPSEC, SSL/TLS
Networking standards	IEEE 802.1p
Ethernet LAN data rates	10, 100, 1000 Mbit/s

Weight and Dimensions

Weight	4900 g
Dimensions (WxDxH)	440.9 x 370.1 x 43.6 mm