EasyManua.ls Logo

Juniper SRX5400 - Page 21

Juniper SRX5400
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Supported Slots
SRX5400–Any slot, except the boom slot 0 which is reserved for SCB/RE.
SRX5600–Any slot, except the boom slots 0 or 1 which are reserved for SCB/RE.
SRX5800–Any slot, except the slots 0 or 1 which are reserved for SCB/RE.
Power
Requirement
475 W typical, 585 W maximum
NOTE:
In the SRX5600 and SRX5800 Firewalls, you must have high-capacity power supplies
(either AC or DC) and high-capacity fan trays installed in the rewall in order to install
and use SRX5K-SPC-4-15-320 SPCs. If you do not have high-capacity power supplies
and fan trays installed, the rewall will log an alarm condion when it recognizes the
SRX5K-SPC-4-15-320 SPCs.
On SRX5600 Firewalls with AC power supplies, we recommend that you use high-line
(220v) input power to ensure the device has adequate power to support SRX5K-
SPC-4-15-320 SPCs.
Weight Approximately 18 lb (8.3 kg)
17

Table of Contents

Other manuals for Juniper SRX5400

Related product manuals