Juniper SRX5400 - Switch Control Board SRX5 K-SCB4 Specifications

Switch Control Board SRX5K-SCB4 Specicaons
IN THIS SECTION
SRX5K-SCB4 LEDs | 85
SRX5K-SCB4 (SCB4) consists of the following components:
• LEDs to provides status of the SCB4.
• Circuits for chassis management and control.
• Power circuits for the Roung Engine and SCB4.
Descripon SCB4 with slot for SRX5K-RE-1800X4 and SRX5K-RE3-128G Roung Engines
Soware release Junos OS Release 19.3R1 and later
Cables and connectors Slot for Roung Engine
Controls None
Supported slots
• SRX5400–Not supported
• SRX5600–Only boom slots 0 and 1
• SRX5800–Only center slots 0, 1, and 2/6
Power requirement At dierent temperatures:
• 55° C: 425 W
• 40° C: 400 W
• 25° C: 385 W
Cooling requirement For ecient and reliable power and cooling, you must install SRX Series high-capacity
power supplies and fan trays in the SRX Series chassis.
84