Juniper SRX5400 - Flex IO Card Port Module SRX-IOC-16 GE-SFP Specifications

Weight Approximately 10 lb (4.5 kg)
LEDs OK/FAIL LED, one bicolor:
• Steady green–The Flex IOC is operang normally.
• Red–The Flex IOC has failed and is not operang normally.
• O–The Flex IOC is powered down.
Serial Number Locaon The serial number label is located as shown in Figure 12 on page 34.
Figure 12: Serial Number Label (IOC Shown, Other Cards Similar)
Flex I/O Card Port Module SRX-IOC-16GE-SFP
Specicaons
You use port modules and Flex I/O Cards (Flex IOCs) to add dierent combinaons of small form-factor
pluggable transceiver (SFP), 10-gigabit SFP transceiver (XFP), and copper ports to your rewall to suit
the specic needs of your network. The SRX-IOC-16GE-SFP port module (Figure 13 on page 35)
installs into a Flex IOC to add sixteen 10/100/1000 Ethernet SFP ports.
34