Juniper SRX5400 - Page 57

The sample output of the show chassis fpc pic-status command displays two 10-port 10-
Gigabit Ethernet MICs with SFP+ — inserted into the slots of an MPC in slot 2.
The logical PICs of the two MICs— 10x 10GE SFP+ — are shown as PIC 0 and PIC 2.
user@host> show chassis fpc pic-status
Slot 1 Online SRX5k SPC II
PIC 0 Online SPU Cp
PIC 1 Online SPU Flow
PIC 2 Online SPU Flow
PIC 3 Online SPU Flow
Slot 2 Online SRX5k IOC II
PIC 0 Online 10x 10GE SFP+
PIC 2 Online 10x 10GE SFP+
The show interfaces terse command output displays the 10–Gigabit Ethernet interfaces
that correspond to the 10 ports located on each MIC.
user@host> show interfaces terse
Interface Admin Link Proto Local Remote
gr-0/0/0 up up
ip-0/0/0 up up
lt-0/0/0 up up
xe-2/0/0 up up
xe-2/0/1 up up
xe-2/0/2 up up
xe-2/0/2.0 up up inet 131.131.131.2/24
inet6 1300::2/64
fe80::224:dcff:fe20:b94c/64
multiservice
xe-2/0/3 up up
xe-2/0/4 up up
xe-2/0/5 up up
xe-2/0/6 up up
xe-2/0/6.0 up up inet 141.141.141.1/24
inet6 1400::1/64
fe80::224:dcff:fe20:b950/64
multiservice
xe-2/0/7 up down
xe-2/0/8 up down
xe-2/0/9 up down
xe-2/2/0 up down
xe-2/2/1 up down
xe-2/2/2 up down
53