Juniper SRX5400 - Page 83

Each SRX5K-SCBE consists of the following components:
• I2C bus logic for low-level communicaon with each component
• Component redundancy circuitry
• Control Board/Roung Engine primary-role mechanism
• Gigabit Ethernet switch that is connected to the embedded CPU complex on all components
• Switch fabric to provide the switching funcons for the MPCs
• 1000BASE-T Ethernet controller to provide a 1-Gbps Ethernet link between the Roung Engines
• Power circuits for the Roung Engine and the SRX5K-SCBE
• LEDs—Provides status of the SRX5K-SCBE and clocking interface
Descripon
• SRX5K-SCBE with slot for Roung Engine
• Maximum throughput: 120 Gbps per slot
Soware release Junos OS Release 12.1X47-D15 and later
Cables and connectors Slot for Roung Engine
Controls None
Supported slots
• SRX5400–Only boom slots 0 and 1/0
• SRX5600–Only boom slots 0 and 1
• SRX5800–Only center slots 0, 1, and 2/6
Power requirement
• 160 W at 131º F (55º C)
• 130 W at 104º F (40º C)
• 120 W at 77º F (25º C)
Weight 9.6 lb (4.4 kg) with Roung Engine
79