EasyManua.ls Logo

Juniper SRX5400 - Page 22

Juniper SRX5400
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Processor subsystem, which includes a 1.2-GHz CPU, system controller, and 1 GB of SDRAM.
LEDs on the faceplate that indicate the SPC and SPU status.
SPC with two SPUsDescription
Junos OS Release 9.2 and laterSoftware release
CHASSIS CLUSTER CONTROL 0 and CHASSIS CLUSTER CONTROL 1–SFP ports for control
links in chassis cluster configurations.
Supported SFP transceivers:
1000BASE-LH (model numbers SRX-SFP-1GE-LH, SRX-SFP-1GE-LH-ET)
1000BASE-LX (model numbers SRX-SFP-1GE-LX, SRX-SFP-1GE-LX-ET)
1000BASE-SX (model numbers SRX-SFP-1GE-SX, SRX-SFP-1GE-SX-ET)
Cables and
connectors
NoneControls
SRX5600–Any slot, except the bottom slots 0 or 1 which are reserved for SCB/RE.
SRX5800–Any slot, except the slots 0 or 1 which are reserved for SCB/RE.
Supported Slots
Maximum 351 WPower
Requirement
Approximately 13 lb (5.9 kg)Weight
11

Table of Contents

Other manuals for Juniper SRX5400

Related product manuals