Juniper SRX5400 - Flex IO Card Port Module SRX-IOC-4 XGE-XFP Specifications

The serial number label is located as shown in Figure 16 on page 34.
Figure 16: Port Module SRX-IOC-16GE-TX Serial Number Label
g030305
JX0123
Serial number
ID label
Serial Number Location
Flex I/O Card Port Module SRX-IOC-4XGE-XFP Specifications
You use port modules and Flex I/O Cards (Flex IOCs) to add different combinations of small form-factor
pluggable transceiver (SFP), 10-gigabit SFP transceiver (XFP), and copper ports to your services gateway
to suit the specific needs of your network. The SRX-IOC-4XGE-XFP port module (Figure 17 on page 34)
installs into a Flex IOC to add four 10-Gigabit Ethernet XFP ports.
Figure 17: Flex IOC Port Module SRX-IOC-4XGE-XFP
g030269
•
Port module with four 10-Gigabit Ethernet XFP ports
•
Maximum throughput: 10 Gbps
•
Oversubscription ratio: 4:1
•
Maximum configurable MTU: 9192 bytes
Description
•
Junos OS Release 9.5R1 and laterSoftware release
4 XFP Ethernet ports
Supported XFP transceivers:
10GBASE-ER (model numbers SRX-XFP-10GE-ER and SRX-XFP-10GE-ER-ET )
10GBASE-LR (model numbers SRX-XFP-10GE-LR and SRX-XFP-10GE-LR-ET
10GBASE-SR (model numbers SRX-XFP-10GE-SR and SRX-XFP-10GE-SR-ET )
Cables and connectors
34