If a slot in the SRX5400, SRX5600, or SRX5800 Services Gateway card cage is not occupied by a card,
you must install a blank panel to shield the empty slot and to allow cooling air to circulate properly through
the services gateway.
•
Fixed-configuration IOC with forty 10-Gbps port speeds
•
Maximum throughput: 400-Gbps
•
Maximum configurable MTU: 9192 bytes
Description
Junos OS Release 19.3R1 and laterSoftware release
•
SRX5400—Any slot, except the bottom slots 0 and 1/0,
which are reserved for SCB/RE.
NOTE: Slot 1/0 is a dual purpose slot. You can install
SRX5K-IOC4-10G in slot 2/6 if an SCB is not already
installed in it.
•
SRX5600—Any slot, except the bottom slots 0 and 1,
which are reserved for SCB/RE.
•
SRX5800—Any slot, except the middle slots 0, 1, and
2/6, which are reserved for SCB/RE, and slots 0 (most
left) and 11 (most right).
NOTE: Slot 2/6 is a dual purpose slot. You can install
SRX5K-IOC4-10G in slot 2/6 if an SCB is not already
installed in it.
Supported slots
See Hardware Compatibility Tool for the transceivers
supported.
Cables and connectors
•
Typical: 405 W
At different temperatures:
•
131° F (55° C): 500 W
•
104° F (40° C): 465 W
•
75° F (25° C): 430 W
Power requirements
17 lb (7.7 kg)Weight
61
To Next Page
Loading...
