1-6 (No.YA362)
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
2.1 SYSTEM SETTEING
(1) Press the [DISPLAY] key and [MUTING] key
simultaneously, then enter the SERVICE MODE.
(2) When the Main Menu is displayed, press [2] key to enter
the self check mode.
(3) Turn off the power by pressing the [POWER] key on the
remote control unit.
2.2 FEATURES
D.I.S.T. (Digital Image Scaling Technology)
This system uses line interpolation to double the number of
scanning lines and achieve high resolution, flicker-free picture.
COLOUR MANAGEMENT
This function ensures dull colours are compensated to
produce natural hues.
PICTURE MANAGEMENT
This function makes it easier to see the dark areas when a
picture has many dark areas, and makes it easier to see the
bright areas when a picture has many bright areas.
ZOOM
This function can change the screen size according to the
picture aspect ratio.
DIGITAL VNR
This function cuts down the amount of noise in the original
picture.
SUPER DIGIPURE
This function uses the latest in digital technology to give you a
natural-looking picture.
CINEMA SURROUND
You can enjoy an enhanced sound for wider audience.
PULL DOWN
This function displays a cinema film picture more smoothly and
naturally on the screen.
2.3 MAIN DIFFERENCE LIST
Be sure to carry out the following operation at the end of
the procedure.
MAIN MENU SCREEN
SELF CHECK MODE SCREEN
LOB OK FAN OK
SYNC M:OK S:OK HD:NG
TIM OK
MSM OK DIGI 0000
MEM OK AVSW OK
YC OK AIO OK
TUN OK GCR NG 1
IP OK RGB OK 8
DVI OK HDMI OK
SERVICE MENU
1.ADJUST
2.SELF_CHK
3.I2C STOP
Item LT-Z37DX5 LT-Z37DX5/A LT-Z37DX5/S
POWER CORD EU Type (2 Pins) AU Type (2 Pins) UK Type (3 Pins)
SHIELD COVER (DIGITAL SIGNAL PWB) NO YES YES
DIGITAL SIGNAL PWB LCA10557-85A
(SFL-0D343A)
LCA10557-87A
(SFL-0D345A)
LCA10557-86A
(SFL-0D344A)
To Next Page
Loading...
Need help?
General
