Need help?Do you have a question about the JVC RC-M70L and is the answer not in the manual?
General| Type | Cassette Player |
|---|---|
| Brand | JVC |
| Model | RC-M70L |
| Radio | Yes |
| FM Frequency Range | 87.5 - 108 MHz |
| MW Frequency Range | 530 - 1600 kHz |
| LW Frequency Range | 150 - 285 kHz |
| Speakers | 2 speakers |
Describes the audio output system with high power and 4 speakers for rich sound.
Highlights compatibility with metal tape for enhanced recording quality.
Features a wear-resistant head for superior sound quality.
Enables automatic scanning and skipping of up to 16 program selections.
Allows for carefree unattended recordings.
Terminals for connecting a turntable with an MM cartridge.
Advises on avoiding direct sunlight, extreme heat, and humidity.
Details safety measures for power cords and electrical hazards.
Adjusts the output level of speakers or headphones.
Allows manual adjustment of the recording level.
Selects operating modes like TAPE, RADIO, DIN IN, PHONO.
Includes PAUSE, REC, and PLAY buttons for tape control.
Details operation using AC current or batteries.
Connect optional speakers rated at 8 ohms.
Instruction on inserting a tape to begin playback.
Sets the unit for stereo reception or playback.
Selects the correct tape type for optimal playback.
Initiates the tape playback operation.
Controls program selection by skipping or counting programs.
Used to select the number of programs to skip.
Guide on how to select a program located several selections ahead.
Activates the radio tuning function.
Adjusts the station for best reception using the meter.
Selects reception mode for optimal tuning.
Allows the unit to turn off automatically after a set time.
Instructions for recording radio broadcasts.
Sets automatic recording level adjustment.
Starts the recording process.
Activates the unit for tape operations.
Enables stereo monitoring and recording.
Guide on connecting external microphones for recording.
Technique for achieving stereo sound with external mics.
Sets the unit for optimal recording level monitoring.
Fine-tunes recording levels using meters.
Instruction for preparing a tape for erasure.
Sets the recorder for manual erasing operation.
Sets recording level to minimum for erasing.
Connects the timer device for scheduled operations.
Enables the timer function for automatic power off.
Connects external audio sources for recording.
Instructions for copying tapes to a stereo deck.
Connects the unit to a stereo system for audio playback.
Connects external speakers for enhanced audio output.
Essential cleaning of heads, capstan, and pinch roller.
Specific instructions for cleaning tape heads with alcohol.
Details on tuner frequency ranges and reception capabilities.
Information on track system, frequency response, and tape handling.
Specifications for power output and audio performance.
Details on various input connection types and their specifications.
Specifications for power input and battery requirements.
To Next Page
